How to make folded paper Christmas balls

These layered balls ended up being pretty easy to make once I figured it out.  My first ones didn’t come out as nicely, but they got better as I made a few.

My first mistake?  Using only vintage papers, and not being careful to find ones that aren’t brittle.

I discovered that the ideal paper is scrapbooking card stock, but since I love the old stuff so much, I tried using some book pages and wallpaper too.  Plus, a mix looks pretty together.

Vintage flocked wallpaper is ideal, and some more sturdy wallpapers are too.  But most of the antique ones disintegrate when folded.  

I used some Xmas wrapping paper also.  

If you have a fragile paper you just love, and really want to use, maybe try backing it with card stock first.

These were some that worked for me, as well as some book pages. To test it, fold the paper a few times and see if it cracks.  If not, it should work okay.  

Cut and fold all of the pages ahead of time, so you have a pile to work with and not have to pause while gluing.

Fold each piece with the most interesting side inwards, so you are gluing the outsides to each other.  

Glue one folded piece to the next until you have a stack that looks like this.

Another discovery that I made is that it’s a good idea to glue all of the folded circles together and set them aside to dry.  If you try to make the orb while the glue is wet, the paper is more fragile and will easily tear.

While still folded, you can ink the edges.

Add some strong glue (I like The Ultimate) along the folded edge.

Cut ribbon or string, and fold it in half with a loop at the end.

 (I used pipe cleaners down the center of some, and it did work, but for me, it was too easy to poke through the papers with it, string or ribbon is better).

Then stick the ribbon into the glue, with the loop at the top and the two ends hanging out of the bottom.  

Open the pages.

Apply glue to both half circle sides, then press them together to make the orb.  Smoosh them together and there it is!  You might need to carefully pick each layer apart, gently manipulate them, and form the circle.

If you get a tear when opening it up, just attach an extra circle over that segment.

You can use the two trailing ends or your ribbon or string to tie a bundle of netting and ribbons to the bottom.

Or use them to tie on charms.  Or do both! (I liked the idea of book charms with the old book pages).

How many circles did I use?  Well, they are all different.  The thinner the paper, the more you need.  The heavier papers fill out nicely without as many. And because they are thick, too many makes the stack so high that when you put them together you have a huge gap in the center.

So, about 20 for thin papers, half that much for heavy ones.